Inheritance diagram for SelectTool:

Collaboration diagram for SelectTool:

Public Member Functions
	SelectTool (QObject *parent=nullptr)

ToolType	type () const override

void	loadSettings () override

QCursor	cursor () override

Public Member Functions inherited from TransformTool
	TransformTool (QObject *parent=nullptr)

ToolProperties &	toolProperties () override

const TransformToolProperties &	transformSettings () const

void	setShowSelectionInfo (bool enabled)

void	setAntiAliasingEnabled (bool enabled)

Public Member Functions inherited from BaseTool
QString	typeName ()

void	initialize (Editor *editor)

virtual ToolType	type () const =0

virtual ToolProperties &	toolProperties ()=0

virtual void	loadSettings ()=0

void	saveSettings ()

void	resetSettings ()

virtual QCursor	cursor ()

virtual void	pointerPressEvent (PointerEvent *)=0

virtual void	pointerMoveEvent (PointerEvent *)=0

virtual void	pointerReleaseEvent (PointerEvent *)=0

virtual void	pointerDoubleClickEvent (PointerEvent *)

virtual bool	keyPressEvent (QKeyEvent *)

virtual bool	keyReleaseEvent (QKeyEvent *)

virtual bool	enterEvent (QEnterEvent *)

virtual bool	leaveEvent (QEvent *)

virtual void	clearToolData ()

virtual bool	isActive () const
	Check if the tool is active.

virtual void	paint (QPainter &painter, const QRect &blitRect)

virtual bool	leavingThisTool ()
	Will clean up `active` connections.

virtual bool	enteringThisTool ()
	Setup `active` connections here that should only emit while tool is active `leavingThisTool` will handle the cleanup of `active` connections.

bool	isPropertyEnabled (int rawType)

bool	isDrawingTool ()
	BaseTool::isDrawingTool - A drawing tool is anything that applies something to the canvas.

Public Member Functions inherited from QObject
virtual const QMetaObject *	metaObject () const const

	QObject (QObject *parent)

virtual bool	event (QEvent *e)

virtual bool	eventFilter (QObject watched, QEvent event)

QString	objectName () const const

void	setObjectName (const QString &name)

bool	isWidgetType () const const

bool	isWindowType () const const

bool	signalsBlocked () const const

bool	blockSignals (bool block)

QThread *	thread () const const

void	moveToThread (QThread *targetThread)

int	startTimer (int time, Qt::TimerType timerType)

void	killTimer (int id)

T	findChild (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QString &name, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegExp &regExp, Qt::FindChildOptions options) const const

QList< T >	findChildren (const QRegularExpression &re, Qt::FindChildOptions options) const const

const QObjectList &	children () const const

void	setParent (QObject *parent)

void	installEventFilter (QObject *filterObj)

void	removeEventFilter (QObject *obj)

QMetaObject::Connection	connect (const QObject sender, const char signal, const char *method, Qt::ConnectionType type) const const

bool	disconnect (const char signal, const QObject receiver, const char *method) const const

bool	disconnect (const QObject receiver, const char method) const const

void	dumpObjectTree ()

void	dumpObjectInfo ()

void	dumpObjectTree () const const

void	dumpObjectInfo () const const

bool	setProperty (const char *name, const QVariant &value)

QVariant	property (const char *name) const const

QList< QByteArray >	dynamicPropertyNames () const const

void	destroyed (QObject *obj)

void	objectNameChanged (const QString &objectName)

QObject *	parent () const const

bool	inherits (const char *className) const const

void	deleteLater ()

	Q_DISABLE_COPY (Class)

	Q_DISABLE_MOVE (Class)

	Q_DISABLE_COPY_MOVE (Class)

T	qobject_cast (QObject *object)

T	qobject_cast (const QObject *object)

T	qFindChild (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QString &name)

QList< T >	qFindChildren (const QObject *obj, const QRegExp &regExp)

	Q_CLASSINFO (Name, Value)

	Q_INTERFACES (...)

	Q_PROPERTY (...)

	Q_ENUMS (...)

	Q_FLAGS (...)

	Q_ENUM (...)

	Q_FLAG (...)

	Q_ENUM_NS (...)

	Q_FLAG_NS (...)

	Q_OBJECT Q_OBJECT

	Q_GADGET Q_GADGET

	Q_NAMESPACE Q_NAMESPACE

	Q_NAMESPACE_EXPORT (EXPORT_MACRO)

	Q_SIGNALS Q_SIGNALS

	Q_SIGNAL Q_SIGNAL

	Q_SLOTS Q_SLOTS

	Q_SLOT Q_SLOT

	Q_EMIT Q_EMIT

	Q_INVOKABLE Q_INVOKABLE

	Q_REVISION Q_REVISION

	Q_SET_OBJECT_NAME (Object)

	QT_NO_NARROWING_CONVERSIONS_IN_CONNECT QT_NO_NARROWING_CONVERSIONS_IN_CONNECT

Private Member Functions
void	pointerPressEvent (PointerEvent *) override

void	pointerReleaseEvent (PointerEvent *) override

void	pointerMoveEvent (PointerEvent *) override

bool	keyPressEvent (QKeyEvent *event) override

void	controlOffsetOrigin (QPointF currentPoint, QPointF anchorPoint, Layer::LAYER_TYPE layerType)

void	beginSelection (Layer *currentLayer, const QPointF &pos)

void	keepSelection (Layer *currentLayer)
	SelectTool::keepSelection Keep selection rect and normalize if invalid.

QPointF	offsetFromPressPos (const QPointF &pos)

bool	isSelectionPointValid (const QPointF &pos)

bool	maybeDeselect (const QPointF &pos)

Private Attributes
QPointF	mAnchorOriginPoint

QPointF	mPressPoint

MoveMode	mMoveMode

MoveMode	mStartMoveMode = MoveMode::NONE

QRectF	mSelectionRect

QPixmap	mCursorPixmap = QPixmap(24, 24)

const UndoSaveState *	mUndoState = nullptr

Additional Inherited Members
Signals inherited from TransformTool
void	showSelectionInfoChanged (bool enabled)

void	antiAliasingChanged (bool enabled)

Signals inherited from BaseTool
bool	isActiveChanged (ToolType, bool)

Static Public Member Functions inherited from BaseTool
static QString	TypeName (ToolType)

Static Public Member Functions inherited from QObject
QString	tr (const char sourceText, const char disambiguation, int n)

QString	trUtf8 (const char sourceText, const char disambiguation, int n)

QMetaObject::Connection	connect (const QObject sender, const char signal, const QObject receiver, const char method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method, Qt::ConnectionType type)

QMetaObject::Connection	connect (const QObject *sender, PointerToMemberFunction signal, Functor functor)

QMetaObject::Connection	connect (const QObject sender, PointerToMemberFunction signal, const QObject context, Functor functor, Qt::ConnectionType type)

bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char method)

bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method)

bool	disconnect (const QMetaObject::Connection &connection)

bool	disconnect (const QObject sender, PointerToMemberFunction signal, const QObject receiver, PointerToMemberFunction method)

Public Attributes inherited from QObject
typedef	QObjectList

Protected Member Functions inherited from BaseTool
	BaseTool (QObject *parent)

Editor *	editor ()

Protected Member Functions inherited from QObject
QObject *	sender () const const

int	senderSignalIndex () const const

int	receivers (const char *signal) const const

bool	isSignalConnected (const QMetaMethod &signal) const const

virtual void	timerEvent (QTimerEvent *event)

virtual void	childEvent (QChildEvent *event)

virtual void	customEvent (QEvent *event)

virtual void	connectNotify (const QMetaMethod &signal)

virtual void	disconnectNotify (const QMetaMethod &signal)

Protected Attributes inherited from TransformTool
TransformToolProperties	mSettings

Protected Attributes inherited from BaseTool
QHash< int, QSet< Layer::LAYER_TYPE > >	mPropertyUsed

Editor *	mEditor = nullptr

ScribbleArea *	mScribbleArea = nullptr

QList< QMetaObject::Connection >	mActiveConnections

Properties inherited from QObject
	objectName

Detailed Description

Definition at line 32 of file selecttool.h.

Constructor & Destructor Documentation

◆ SelectTool()

SelectTool::SelectTool ( QObject * parent = nullptr )

explicit

Definition at line 29 of file selecttool.cpp.

Member Function Documentation

◆ beginSelection()

void SelectTool::beginSelection	(	Layer *	currentLayer,
		const QPointF &	pos
	)

private

Definition at line 90 of file selecttool.cpp.

◆ controlOffsetOrigin()

void SelectTool::controlOffsetOrigin	(	QPointF	currentPoint,
		QPointF	anchorPoint,
		Layer::LAYER_TYPE	layerType
	)

private

Definition at line 228 of file selecttool.cpp.

◆ cursor()

QCursor SelectTool::cursor ( )

overridevirtual

Reimplemented from BaseTool.

Definition at line 50 of file selecttool.cpp.

◆ isSelectionPointValid()

bool SelectTool::isSelectionPointValid ( const QPointF & pos )

inlineprivate

Definition at line 59 of file selecttool.h.

◆ keepSelection()

void SelectTool::keepSelection ( Layer * currentLayer )

private

SelectTool::keepSelection Keep selection rect and normalize if invalid.

Definition at line 217 of file selecttool.cpp.

◆ keyPressEvent()

bool SelectTool::keyPressEvent ( QKeyEvent * event )

overrideprivatevirtual

Reimplemented from BaseTool.

Definition at line 254 of file selecttool.cpp.

◆ loadSettings()

void SelectTool::loadSettings ( )

overridevirtual

Implements BaseTool.

Definition at line 33 of file selecttool.cpp.

◆ maybeDeselect()

bool SelectTool::maybeDeselect ( const QPointF & pos )

private

Definition at line 207 of file selecttool.cpp.

◆ offsetFromPressPos()

QPointF SelectTool::offsetFromPressPos ( const QPointF & pos )

private

Definition at line 272 of file selecttool.cpp.

◆ pointerMoveEvent()

void SelectTool::pointerMoveEvent ( PointerEvent * event )

overrideprivatevirtual

Implements BaseTool.

Definition at line 137 of file selecttool.cpp.

◆ pointerPressEvent()

void SelectTool::pointerPressEvent ( PointerEvent * event )

overrideprivatevirtual

Implements BaseTool.

Definition at line 114 of file selecttool.cpp.

◆ pointerReleaseEvent()

void SelectTool::pointerReleaseEvent ( PointerEvent * event )

overrideprivatevirtual

Implements BaseTool.

Definition at line 170 of file selecttool.cpp.

◆ type()

ToolType SelectTool::type ( ) const

inlineoverridevirtual

Implements BaseTool.

Definition at line 39 of file selecttool.h.

Member Data Documentation

◆ mAnchorOriginPoint

QPointF SelectTool::mAnchorOriginPoint

private

Definition at line 64 of file selecttool.h.

◆ mCursorPixmap

QPixmap SelectTool::mCursorPixmap = QPixmap(24, 24)

private

Definition at line 70 of file selecttool.h.

◆ mMoveMode

MoveMode SelectTool::mMoveMode

private

Definition at line 66 of file selecttool.h.

◆ mPressPoint

QPointF SelectTool::mPressPoint

private

Definition at line 65 of file selecttool.h.

◆ mSelectionRect

QRectF SelectTool::mSelectionRect

private

Definition at line 68 of file selecttool.h.

◆ mStartMoveMode

MoveMode SelectTool::mStartMoveMode = MoveMode::NONE

private

Definition at line 67 of file selecttool.h.

◆ mUndoState

const UndoSaveState* SelectTool::mUndoState = nullptr

private

Definition at line 72 of file selecttool.h.

The documentation for this class was generated from the following files:

core_lib/src/tool/selecttool.h
core_lib/src/tool/selecttool.cpp

Public Member Functions

Private Member Functions

Private Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ SelectTool()

Member Function Documentation

◆ beginSelection()

◆ controlOffsetOrigin()

◆ cursor()

◆ isSelectionPointValid()

◆ keepSelection()

◆ keyPressEvent()

◆ loadSettings()

◆ maybeDeselect()

◆ offsetFromPressPos()

◆ pointerMoveEvent()

◆ pointerPressEvent()

◆ pointerReleaseEvent()

◆ type()

Member Data Documentation

◆ mAnchorOriginPoint

◆ mCursorPixmap

◆ mMoveMode

◆ mPressPoint

◆ mSelectionRect

◆ mStartMoveMode

◆ mUndoState